AC frame fans
Fandis Costech standard frame fans have a number of technical features that make them the ideal and reliable solution for cooling in the electronics industry.
Features
- Casing in balck die cast aluminum alloy
- Impeller in fibreglass reinforced PBT PC
- Electrical connection: Wire or terminal
- Motor protection: Impedance or thermal
- Ball or sleeve bearing
- Smallest fan size 60x60x30mm, largest 280x280x80mm
- Rated voltage: 24VAC, 115VAC, 230VAC, 400V 3 ̴
- Air flows: 13 m3/h – 1680 m3/h
Check the supplier’s website for more detailed product features
DC frame fans
Fandis Costech standard frame fans have a number of technical features that make them the ideal and reliable solution for cooling in the electronics industry.
Features
- Casing and impeller in black fiberglass reinforced PBT
- Brushless motor
- Electrical connection: 2 leads
- Motor protection: Impedance or IC
- Ball, sleeve or hypro bearing
- Smallest fan size 20x20x10mm, largest 218x218x83mm
- Rated voltage: 5VDC, 12VDC, 24VDC, 48VDC
- Air flows: 0,85 m3/h – 1030m3/h
Check the supplier’s website for more detailed product features
Special models
The special models allows the use in environments with critical conditions for temperature, water splashes and dust content.
Features
- IP55 – AC frame fans
- Ideal for indoor or outdoor use in harsh environments.
- High temperature models – AC frame fans
- Maximum operating temperatue range +90°C.
- IP55 – DC frame fans
- Ideal for indoor or outdoor use in harsh environments.
Check the supplier’s website for more detailed product features
FF Series Filter Fans
FF Series Filter Fans provide comprehensive solutions to keep cabinet and enclosure internal temperatures at the right operating level.
Features
- Free-tool mounting system
- Plate thickness: FF08 from 1 to 2mm; FF12, FF13 from 1.3 to 3.2mm; FF15, FF20 from 1.3 to 3.7mm
- Quick electrical connection by screwless terminal block
- Standard color RAL 7035
- Standard protection rating IP54
- Cut-Outs: 91.5×91.5mm, 124x124mm, 177x177mm, 223x223mm, 291x291mm
- Rated voltage: 12VDC, 24VDC, 48VDC, 115VAC, 230VAC, 400 V 3 ̴
- Air flows: 10 m3/h – 895 m3/h
Check the supplier’s website for more detailed product features
FF Series Filters
Available in a wide range of configurations for both indoor and outdoor use.
Features
- Free-tool mounting system
- Plate thickness: FF08 from 1 to 2mm; FF12, FF13 from 1.3 to 3.2mm; FF15, FF20 from 1.3 to 3.7mm
- Standard color RAL 7035
- Standard protection rating IP54
- Cut-Outs: 91.5×91.5mm, 124x124mm, 177x177mm, 223x223mm, 291x291mm
Check the supplier’s website for more detailed product features
TP series roof exhaust units
Roof exhaust units are commonly used in restricted spaces to dissipate hot air that is extracted from the top of enclosures.
Features
- Plastic structure with aluminium top
- Available in 4 protection degrees: IP24, IP44, IP54 and IP55
- Standard color RAL 7035
- Rated voltage: 24VDC, 48VDC, 115VAC, 230VAC
- Air flows: 420 m3/h – 620 m3/h
Check the supplier’s website for more detailed product features
Heaters with cable or terminal block
Heaters are used for warming up the air inside enclosures, protecting electrical and electronic components from condensation and corrosion.
Features
- Metal (M) or touch-safe (P) plastic cover
- Cable; 3x20AWG, length 500mm.
- Terminal block; 3 screwless terminals
- Clip fastening system for DIN rail TS35
- Heating element consints of a self-regulating PTC resistor
- Heating power 5W – 150W
- Rated voltage 110-240 V a.c./d.c.
Check the supplier’s website for more detailed product features
Heaters with fan
Heaters with built-in fans provide a forced air circulation to guarantee an even heat distribution in encloruses, thus minimizing the risk of condensation.
Features
- Metal (M) or touch-safe (P) plastic cover
- Terminal block; 3 screwless terminals
- Clip fastening system for DIN rail TS35
- Heating element consints of a self-regulating PTC resistor with integrated bimetal thermal protector
- Heating power 200W – 350W
- Rated voltage 115 V a.c. , 230 V a.c.
Check the supplier’s website for more detailed product features
Termostaatit
Lämpötilan säätimet auttavat takaamaan optimaaliset olosuhteet kotelon sisällä sähkökomponenttien häiriöttömälle toiminnalle. Niitä käytetään tuuletinsuodattimien, lämmittimien ohjaamiseen tai signaalilaitteiden kytkemiseen.
Ominaisuudet
- Normaalisti suljettu (NC) ja normaalisti avoin (NO) versiot
- Patentoitu pikakiinnitysjärjestelmä DIN-kiskoihin TS35/15/32
- Laaja käyttölämpötila-alue °C tai °F, asetus käsin tai työkalulla
- Vakioväri RAL 7035
- Nimellisjännitealue 60 V d.c. ; 110-250 V a.c.
- Nimellisvirta 10 A
Tutustu tarkempiin tuoteominaisuuksiin toimittajan sivuilla.
